EALTEK ROM Monitor, Revision 0000.1000.0121. Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved. For a list of available commands, type 'help'. Compilation time /version= Mar 26 2010 19:47:27 /0000.1000.0121 MAC address = 00.10.75.0b.6f.d5 Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00 Processor ID/revision = 0x93 / 0x78 Endianness = Little Flash memory size = 256 MByte SDRAM size = 128 MByte First free SDRAM address = 0x800fb300 Press 'ESC' to Monitor mode Linux Kernel: FW Image from 0xa2020000, to 0x80100000, size=0x40f086 decrypt from 0xa2020000 to 0x80100000, len:0x40f086 Audio FW: FW Image from 0xa2440000, to 0x81b00000, size=0x1b7560 decrypt from 0xa2440000 to 0x81b00000, len:0x1b7560 Video FW: FW Image from 0xa2600000, to 0x81d80000, size=0x233030 decrypt from 0xa2600000 to 0x81d80000, len:0x233030 5280Go 5280Go Bgo o0arx8d010B0o0n00 mtdparts=rtk_nand:163968k,14976k(/),8576k(/usr/local/Resource),61440k(/udsirn/gl o cal0/extc0),10030108640k partit2io n_ hash=1:15212544:13A75B47F795D275ECAA25778FF9CC33D65F65FA rootfstype=squashfs root=31:01 Reset Ethernet Mac. Address = 0x80100000 Realtek LINUX (DC ALIAS) started... Venus setting: ROSs have 2621440 bytes RAM. System CPU has 2 UARTs. System CPU uses external timer interrupt. Bootloader version: 0000.1000.0121. This version string is of new format. [0m [31;5mError! Bootloader has a wrong CPU ID? [0m Ethernet Mac address: 00.10.75.0b.6f.d5 parse_series_variable,276: Error! Not legal number char! Model Config length=-1 Config serial console: console=ttyS0,115200n8r prom_flashsize = 0x10000000 Linux version 2.6.12.6-VENUS (root@SA2.realtek.com) (gcc version 3.4.4 mipssde-6.02.03-20050629) #15 Thu Mar 25 17:30:44 CST 2010 audio addr: 1b00000 CPU revision is: 00019378 Determined physical RAM map: memory: 00100000 @ 00000000 (usable) memory: 0042d000 @ 00100000 (reserved) memory: 015d3000 @ 0052d000 (usable) memory: 00500000 @ 01b00000 (reserved) memory: 06000000 @ 02000000 (usable) show info: max_low_pfn:32768 show info: min_low_pfn:1325 Built 1 zonelists Kernel command line: mtdparts=rtk_nand:163968k,14976k(/),8576k(/usr/local/Resource),61440k(/usr/local/etc),13184k partition_hash=1:15212544:13A75B47F795D275ECAA25778FF9CC33D65F65FA rootfstype=squashfs root=31:01 console=ttyS0,115200n8r ip=192.168.0.11::192.168.0.254:255.255.2 Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). Cache parity protection disabled PID hash table entries: 256 (order: 8, 4096 bytes) Estimate value: CPU frequency 405.01 MHz Using 27.000 MHz high precision timer. Console: colour dummy device 80x25 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 119540k/121676k available (3413k kernel code, 2112k reserved, 598k data, 144k init, 0k highmem) Warning! Unknown board id. ==================== Warning! The calculated loops_per_jiffy is not similar to the default one. ==================== Mount-cache hash table entries: 512 Checking for 'wait' instruction... available. ========== board id: 1000 ========== [INFO] neptune mode... boot_param value: a0002800 mode: 0 size: 1312 color1: 0x808010 color2: 0x808055 color3: 0x8080b2 color4: 0x8080eb NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub se init module major number = 254 size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52... Hello, Realtek TLB Mapper squashfs: version 3.1 (2006/08/19) Phillip Lougher devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. YAFFS Driver Rev:292241 (2010-01-19) YAFFS Driver is successfully installing. Initializing Cryptographic API Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: [Audio Firmware Version] 300177 [Binary src compiled at] Mar 15 2010 16:58:53 1.90 $ 4 ports, IRQ sharing enabled ttyS0 at MMIO 0x0 (irq = 3) is a 16550A ttyS1 at MMIO 0x0 (irq = 3) is a 16550A io scheduler noop registered RAMDISK driver initialized: 1 RAM disks of 128K size 1024 blocksize loop: loaded (max 8 devices) this MARS eth RX_OFFSET = 0x0 8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) MAC address = 0x00.10.75.0b.6f.d5 eth0: RTL-8139C+ at 0xb8016000, 00:10:75:0b:6f:d5, IRQ 2 VenusSFC MTD init serial flash inaccessible physmap flash device: 10000000 at fd00000 Realtek NAND Flash Driver Rev:293877 (2010-01-26) One TC58NVG1S3E chip has 1 die(s) on board cp_hotplug nand part=TC58NVG1S3E, id=98da9015, device_size=268435456, chip_size=268435456, num_chips=1, isLastPage=0 [rtk_nand_scan_bbt] have created bbt B0, just loads it !! [dump_BBT] Nand BBT Content Congratulation!! No BBs in this Nand. 5 cmdlinepart partitions found on MTD device rtk_nand RTK: using dynamic nand partition Creating 5 MTD partitions on "rtk_nand": 0x00000000-0x0a020000 : "Partition_000" 0x0a020000-0x0aec0000 : "/" 0x0aec0000-0x0b720000 : "/usr/local/Resource" 0x0b720000-0x0f320000 : "/usr/local/etc" 0x0f320000-0x10000000 : "Partition_004" 0x00000000-0x10000000 : "disc" Realtek Nand Flash Driver is successfully installing. Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver i2c /dev entries driver [I2C0] i2c speed changed to 100 KHz I2C0 Bus Status Check.... OK ========================= = VER : 2.0a ========================= = PHY : 0 = MODE: MARS = SPD : 100 = SAR : 0x024 (7 bits) = TX FIFO DEPTH : 8 = RX FIFO DEPTH : 8 = FIFO THRESHOLD: 4 = BUS JAM RECORVER : ON = NON STOP WRITE : ON = SP PROTECT : ON ========================= FATAL : I2C 1 pins have been occupied by PCI Trying to free free IRQ3 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 Realtek Venus Power Management, (c) 2006 Realtek Semiconductor Corp. cp_open alloc rings cp->rxdesc_buf =0xa1949000 , cp->ring_dma=0x1949000 init_hw init_hw finished IP-Config: Unable to set interface netmask (-22). VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing prom memory: 0kb freed Reclaim bootloader memory from 80020000 to 80100000 Freeing unused kernel memory: 144k freed try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... RTK rtc can work. Secure boot succeeded. The partition /dev/mtdblock/1 is secure. Welcome to Realtek Linux Please press Enter to activate this console. ------flush priority: 10 flush_page_cache: do flush... ------flush priority: 10 flush_page_cache: do flush... ------flush priority: 10 flush_page_cache: do flush... ------flush priority: 10 flush_page_cache: do flush... yaffs: dev is 32505859 name is "mtdblock3" yaffs: Attempting MTD mount on 31.3, "mtdblock3" yaffs: auto selecting yaffs2 ------flush priority: 10 flush_page_cache: do flush... libata version 1.12 loaded. sata driver initial...2009/12/30 14:50 mars_init_sata(1255)dev_addr:c007c4f0 ata_device_add(4891)probe begin scsi0 : SATA_DRV sata dma reset Running dvdplayer with RootApp set corepath: /tmp/hdd/volumes/HDD1/ RootApp AVHDD version... enter 2nd case... ================================================ ================================================ root execute DvdPlayer... ================================================ ================================================ IN : /tmp/ramfs/smb downloader 0 starts, 0x10240e30 downloader 1 starts, 0x10240f40 sata1: reset phy again! sata phy reset CMD: mkdir -p /tmp/netb/smb In my system... CMD: mkdir -p /tmp/smb In my system... CMD: ifconfig > /tmp/netb/samba_my_ip In my system... file system 2, sector 4294966272 mount to /tmp/hdd/volumes/HDD1 file system 4, sector 262144 mount to na file system 3, sector 262144 mount to /tmp/hdd/root DB FILENAME = /tmp/ramfs/Setup [DataObject.cpp 387]DB Develop Version same . Don't be upgrade. [DataObject.cpp 426]DB Version same . Don't be upgrade. m_BookMark_Size=4096 m_Signature_Size=16 GrandMa 01.55.299220U (User Inp***128MB version... ut)Pipe Created. (Internal Even Memory address 0x40000000 t)Pipe Created. pli initialization... ÿ checked magic number = -2031394438 try_to_free_pages: free 1024 1. start remap DVR zone... fastmode is 100... map_done is 6746... map_fail is 0... Error in threshotry_to_free_pages: free 0 ld value: 0... 1. start remap DVR zone... WatchDog does nofastmode is 100... t receive signalmap_done is 0... for 2 seconds, map_fail is 0... value: 0 try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... try_to_free_pages: free 38 1. start remap DVR zone... fastmode is 100... map_done is 2... map_fail is 0... ###########b8000354=55b########### try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 31... map_fail is 0... Video DebugMem PVIDEO_RPC_SetDebugMemory Called!hysical Address = 0x1069600 try_to_free_pages: free 20 1. start remap DVR zone... fastmode is 100... map_done is 1... map_fail is 0... try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... [AUDIO WARNING] no more memory , do Remote Malloc. Size 0x000c0008 try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* req: c0008, get: 100000 reclaim size: 20000 =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* ------------------- Audio Version = 300177 Common Version = 299762 Build Date = Mar 15 2010 Build Time = 16:58:53 Note = ------------------- sata1: reset phy again! sata phy reset [Video Firmware Version] 301291 [Video Binary Built on] Mar 22 2010 10:48:13 try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... VBM: configured to SD! ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 board = 14 !, if -1, this board has illegal ID file is (AC3,DTS,WMA) (1,0,0) Do you have key?(0 = no!) AC3 = 0, DTS = 0, WMA = 0 Bonding option process 0x00000009 to AUDIO_UNKNOWN_TYPE !!! ClassifyBonding MD(DD) 0x00000602 board = 14 !, if -1, this board has illegal ID file is (AC3,DTS,WMA) (1,0,0) Do you have key?(0 = no!) AC3 = 0, DTS = 0, WMA = 0 Bonding option process 0x0000000a to passThrough ( 0x00000002)!!! ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 board = 14 !, if -1, this board has illegal ID file is (AC3,DTS,WMA) (0,1,0) Do you have key?(0 = no!) AC3 = 0, DTS = 0, WMA = 0 Bonding option process 0x0000001b to AUDIO_UNKNOWN_TYPE !!! ClassifyBonding MD(DD) 0x00000602 board = 14 !, if -1, this board has illegal ID file is (AC3,DTS,WMA) (0,1,0) Do you have key?(0 = no!) AC3 = 0, DTS = 0, WMA = 0 Bonding option process 0x0000001c to AUDIO_UNKNOWN_TYPE !!! ClassifyBonding MD(DD) 0x00000602 board = 14 !, if -1, this board has illegal ID file is (AC3,DTS,WMA) (0,1,0) Do you have key?(0 = no!) AC3 = 0, DTS = 0, WMA = 0 Bonding option process 0x0000001d to AUDIO_UNKNOWN_TYPE !!! ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 board = 14 !, if -1, this board has illegal ID file is (AC3,DTS,WMA) (0,0,1) Do you have key?(0 = no!) AC3 = 0, DTS = 0, WMA = 0 Bonding option process 0x00000023 to AUDIO_UNKNOWN_TYPE !!! ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 ClassifyBonding MD(DD) 0x00000602 High = 0x00000000, Low = 0x03c1b5ea The following Format is supported: MPEG LPCM WMA AAC VORBIS DV DDP (AC3+, EAC3) WMA Pro MP4 LC-AAC MP4 HE-AAC RAW AAC ADPCM FLAC A Law PCM u Law PCM [VIDEO Capability]HighWord 0xffffffff, LowWord 0xffffffff [HDMI]: Set AVMute try_to_free_pages: free 151 1. start remap DVR zone... fastmode is 100... map_done is 11... map_fail is 0... try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 1... map_fail is 0... =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* req: 1c2000, get: 200000 reclaim size: 20000 =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* req: 122000, get: 200000 reclaim size: 80000 =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* [Util.cpp 1286] try_to_free_pages: free 0 videoVersion = 31. start remap DVR zone... 01291 fastmode is 100... map_done is 0... map_fail is 0... =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* req: 66000, get: 80000 reclaim size: 10000 =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* req: 66000, get: 80000 reclaim size: 10000 =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* ~~SetVideoStandard 0 0 try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* req: b0000, get: 100000 reclaim size: 40000 =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* try_to_free_pages: free 0 1. start remap DVR zWARNING[2]:TVE i-underflow @ line 0 WARNING[2]:TVE p-underflow @ line 0 one... fastmode is 100... map_done is 0... map_fail is 0... =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* req: 50000, get: 80000 reclaim size: 20000 =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* IN : /tmp/ramfs/usb/livepause IN : /tmp/ramfs/usb OUT : /tmp/ramfs/usb/livepause IN : /tmp/ramfs/usb/rec try_to_free_pages: free 38 1. start remap DVR zone... fastmode is 100... map_done is 5... map_fail is 0... =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* req: 1c2000, get: 200000 reclaim size: 20000 =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* IN : /tmp/net Create /tmp/net Ok!!! In my system... [DEBUG]: before USB_CheckAllCardReaderChange () USB_CheckAllCardReaderChangeBase : ret = 0 [DEBUG]: after USB_CheckAllCardReaderChange () try_to_free_pages: free 207 1. start remap DVR zone... fastmode is 100... map_done is 34... map_fail is 0... =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* req: 1c2000, get: 200000 reclaim size: 20000 =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... watchdog test pid 204, threshold: 30 try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 8... map_fail is 0... 0 usb block device found No Recording Partition Available !!!!!! No Timeshift Partition Available !!!!!! try_to_free_pages: free 30 1. start remap DVR zone... fastmode is 100... map_done is 12... map_fail is 0... =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* req: 1c2000, get: 200000 reclaim size: 20000 =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* try_to_free_pages: free 0 1. start remap DVR zone... fastmode is 100... map_done is 0... map_fail is 0... =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* req: 1c2000, get: 200000 reclaim size: 20000 =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* 0/4 - /proc/net/rtl8187/wlan0 1/4 - /proc/net/rtl819xU/wlan0 2/4 - /proc/net/rtl819xSU/wlan0 3/4 - /proc/net/rtl819xE/wlan0 In my system... [usb_param] setting for mars Setting for MARS-B [usb_param] set port two for host! watchdog test pi[usb1_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit d 204, threshold[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit : 30 WatchDog d[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit oes not receive [usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit signal for 2 sec[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit onds, value: 5 [usb2_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit [usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit [usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit [usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit [usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit ehci_hcd ehci_hcd: EHCI Host Controller sata1: reset phy extra! sata phy reset ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1 ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000 ehci_hcd ehci_hcd: park 0 ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub : individual port power switching hub : individual port over-current protection 0 usb block device found No Recording Partition Available !!!!!! No Timeshift Partition Available !!!!!! 0 usb block device found No Recording Partition Available !!!!!! No Timeshift Partition Available !!!!!! [cfyeh] set PPE = 0 [usb_param] setting for mars Setting for MARS-B [usb_param] set port two for host! [usb1_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit [usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit [usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit [usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit [usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit [usb2_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit [usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit [usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit [usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit [usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit ohci_hcd ohci_hcd: OHCI Host Controller ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2 ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub : no power switching (usb 1.0) usb 1-2: new high speed USB device using ehci_hcd and address 2 hub : no over-current protection 0 usb block device found No Recording Partition Available !!!!!! No Timeshift Partition Available !!!!!! 0 usb block device found No Recording Partition Available !!!!!! No Timeshift Partition Available !!!!!! This is the current time: PowerUP_Done!!! usb 1-2: device descriptor read/64, error -71 NTP, contacting time.nist.gov for time Can not find net key. Try to use the default one... [HDMI]: MARS HDMI is running... 0520 [HDMI]: Enable HDCP [HDMI]: Show Aksv========================================ST [HDMI]: Aksv= 0x e1 35 7b 13 46. Aksv => Valid. [HDMI]: Show Aksv========================================SP [HDMI]: Hotplug Change !!! -1 -> 0 Key processed.= ffffffce Key processed.= ffffffce Key processed.= ffffffce Key processed.= ffffffce ehci_hcd ehci_hcd: port 2 reset error -145 hub 1-0:1.0: hub_port_status failed (err = -32) usb 1-2: device descriptor read/64, error -71 usb 1-2: new high speed USB device using ehci_hcd and address 3 watchdog test pid 204, threshold: 30 #######[cfyeh-debug] check_reset_complete(188) hack for memorette usb device port_status 0x1009 #######[cfyeh-debug] check_reset_complete(188) hack for memorette usb device port_status 0x1009 ehci_hcd ehci_hcd: port 2 reset error -145 hub 1-0:1.0: hub_port_status failed (err = -32) usb 1-2: device descriptor read/64, error -71 watchdog test pid 204, threshold: 30 #######[cfyeh-debug] check_reset_complete(188) hack for memorette usb device port_status 0x1009 sata1: reset phy extra! sata phy reset #######[cfyeh-debug] check_reset_complete(188) hack for memorette usb device port_status 0x1009 usb 1-2: device descriptor read/64, error -71 usb 1-2: new high speed USB device using ehci_hcd and address 4 watchdog test pid 204, threshold: 30 usb 1-2: device not accepting address 4, error -71 usb 1-2: new high speed USB device using ehci_hcd and address 5 usb 1-2: device not accepting address 5, error -71 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 sata1: reset phy extra! sata phy reset watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 sata1: phy reset timeout! sata1: no device found (phy stat 00000000) sata1: ata_bus_probe failed scsi1 : SATA_DRV sata dma reset sata2: reset phy again! sata phy reset watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 sata2: reset phy again! sata phy reset watchdog test pid 204, threshold: 30 sata2: phy reset timeout! sata2: no device found (phy stat 00000000) sata2: ata_bus_probe failed watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 NTP, contacting tock.stdtime.gov.tw for time watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 NTP, contacting time.stdtime.gov.tw for time watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 NTP, contacting clock.stdtime.gov.tw for time watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30 watchdog test pid 204, threshold: 30